100,000 Refrigerators Recycled by GE Reports UsedRefrigeratorforSale.net

September 20, 2012, 12:00 am

≫ Next: AXEON Acquires Assets of Leading Equipment Manufacturer

≪ Previous: Yacht Accessories Company New Wave Fabrication Announces a Complete Redesign of its Website

$

0

0

(EMAILWIRE.COM, September 20, 2012 ) San Francisco, CA - Many consumers are unaware of the dangers which come with disposing of large appliances such as air conditioners, freezers, and refrigerators. These items are considered to be hazardous due to the fact that the chemical components which make them up are poison to our environment. The very air we breathe, water we drink, and soil our food grows in can be adversely affected by improper disposal of large appliances, but there is good news from GE.

The process of recycling these appliances, known as “white goods,” is a long one. Each appliance has to be broken down very carefully so that the harmful substances are not released into the air or soil. Any reusable parts also have to be set aside and cataloged. GE actually helped to support the only UNTHA Recycling Technology System, or URT in North America. This was done through a partnership with the Appliance Recycling Centers of America, or ARCA. With this new technology, GE has been able to process some one hundred thousand refrigerators, which kept up to five and a half million pounds of freezer and refrigerator materials out of the landfills of the United States.

GE explains that as many as nine million refrigerators are tossed out each year in America. The majority of them are simple shredded for the metals and such that they are made of, while the other forty-seven pounds of insulation and foam wind up buried in America's landfills. Through the URT system, and with the help of ARCA and the Environmental Protection Agency, GE has managed to help more Americans completely recycle their refrigerators.

So what exactly is the URT system? It is a huge machine (40 feet tall) which actually takes large items and “eats” them, leaving the items as small as possible. It takes about one minute for the URT system to disassemble an entire refrigerator, where it used to take hours for the parts to be taken off and the harmful chemicals to be removed. The URT can recover as much as 95% of the insulation and foam which is inside of both freezers and refrigerators, and them reuse it as fuel or for making new products.

GE helps new customers by making the arrangements needed to take away old appliances anytime the consumer buys a new one. When the new unit is delivered, the old one is then taken to be processed properly.

About UsedRefrigeratorforSale.net:

UsedRefrigeratorforSale.net (http://usedrefrigeratorforsale.net) is a site dedicated to helping consumers find a used refrigerator for sale online. The site includes tips and advice for those who are considering the purchase of a used refrigerator.


Aldrin Dwayne Bensel
4159012663
contact@UsedRefrigeratorForSale.net

Source: EmailWire.Com

---

AXEON Acquires Assets of Leading Equipment Manufacturer

September 21, 2012, 12:00 am

≫ Next: Marshall Electronics VS-5310 IP Camera and Pinhole Lenses Provide Versatile, Unique Solutions for Business and Manufacturing Surveillance

≪ Previous: 100,000 Refrigerators Recycled by GE Reports UsedRefrigeratorforSale.net

$

0

0

 

(EMAILWIRE.COM, September 21, 2012 )
Temecula, CA -- AXEON Water Technologies, a premier provider of engineered water treatment solutions, has announced the acquisition of assets and intellectual property rights of a leading systems manufacturer. The company, formerly known as Pure-O-Tech, is a premier manufacturer and full service provider of commercial and industrial reverse osmosis, nanofiltration, ozone and filtration systems. For more than a decade, Pure-O-Tech has provided comprehensive system designs and engineered solutions to customers for a variety of applications.

“We were in talks with decision makers at Pure-O-Tech for quite some time,” said Augustin R. Pavel, AXEON CEO. “After seeing where the company was headed and the potential there, we stepped in and secured a majority of their assets and intellectual property, along with several of their highly skilled and experienced employees. This move secures for AXEON an additional 12 years of engineered system designs and experience, including new technology platforms for us to expand on — such as ozone and perchlorate removal systems.”

AXEON, a manufacturer of commercial and industrial membrane systems, elements, housings and components, will be leveraging some of the technologies that Pure-O-Tech has utilized in their system designs and controls, including their offsite monitoring capabilities software with integrated PLC controls.

“As a growing systems and equipment manufacturer, we regularly examine new and emerging markets and applications that we know will require more sophisticated designs, controls and automation. This type of research is an integral strategy in our mission to remain at the forefront of evolving water treatment. With the purchase of Pure-O-Tech’s assets, we now have some additional technology and knowhow to help meet our customers’ evolving needs.”

For more information, visit www.axeonwater.com

About AXEON Water Technologies

Established in 1989 as a manufacturer of reverse osmosis water treatment products, AXEON’s corporate headquarters, and its research, engineering, manufacturing and support facilities, are located in Temecula, California, USA. The company provides customers worldwide with high-quality membrane systems, elements, housings and chemicals for various markets and applications. AXEON is at the forefront of the water treatment industry, to best serve its customers and support their success with innovation, quality and support. For more information, visit www.axeonwater.com.

###


Augustin Pavel
800-320-4074
apavel@axeonwater.com

Source: EmailWire.Com

Marshall Electronics VS-5310 IP Camera and Pinhole Lenses Provide Versatile, Unique Solutions for Business and Manufacturing Surveillance

September 24, 2012, 12:00 am

≫ Next: Detroit’s Dodge Dart’s 2013 Lineup in August Adds to Rising Confidence of Auto Shoppers

≪ Previous: AXEON Acquires Assets of Leading Equipment Manufacturer

$

0

0

 

Marshall IP Camera with Pinhole Lenses

(EMAILWIRE.COM, September 24, 2012 ) El Segundo, CA – Marshall Electronics announces discreet monitoring solutions for all types of environments, from retail to industrial. The VS-5310 1.3 MP C/CS Day/Night IP Camera works with a wide variety of Marshall pinhole lenses so integrators can tailor a solution to fit companies’ specific surveillance needs, from monitoring a jewelry counter to keeping watch over industrial processes.

The VS-5310 IP Camera can be used for industrial monitoring or covert surveillance, depending on the pinhole lens chosen. The VS-5310 IP Camera works with any of Marshall’s 33 pinhole lenses due to the versatile C/CS mount.

Wide angle and zoom pinhole lenses are virtually hidden from view. They provide effective, discreet surveillance in banks, office buildings, public buildings, and retail stores. To monitor rooms or hallways, the VS-5310 can be positioned behind a wall with a Wide Angle Pinhole Lens like the V-PL26-CS. The wide angle lens is able to see and record an entire room through a hole less than 0.15 inch. A mini zoom pinhole lens like the V-ZPL-05-01 can provide up to a 120 degree horizontal field of view at 4mm.

For industrial applications, the VS-5310 can be equipped with a Hi-Temp Zoom Pinhole Lens capable of withstanding high temperatures, gravel impact, and scatter sand. Applications might include construction sites and manufacturing plants.

Regardless of which pinhole lens is used with the VS-5310 IP Camera, the video captured can be streamed in multiple high resolutions up to 1280 x 720 at 30fps. Marshall’s IP cameras integrate with an existing IP network to enable remote monitoring over one or more computers.

The camera features low power consumption and can be powered from POE (Power over Ethernet) or an optional AC Adaptor for local power. SD Card recording capability is provided in the camera and can be triggered to record many ways including Video Motion Detection and an external contact closure. The auto iris lens control adjusts to changing light levels to ensure good video quality in any light.

Visit Mars-cam.com for more information on IP cameras and lens solutions for covert business surveillance and process monitoring.

About Marshall Electronics

Marshall Electronics' Optical Systems Division supplies lens and camera products to end-user and OEM customers worldwide. Marshall is a global OEM optical products supplier to Tier-1 automotive, leading IP camera, industrial, security, machine vision, military and police equipment Original Equipment Manufacturers. Marshall produces more than 100,000 standard and custom design lens models monthly fulfilling modest to large scale production shipments from our Tier-1 Quality Process Audit-approved production facility. Marshall’s comprehensive line of pinhole, high temperature pinhole, telephoto, and low light lensing is used in law enforcement, military, security and process applications globally.



Ashley Mangino
800-800-6608
ashley@marshallelectronics.net

Source: EmailWire.Com

Detroit’s Dodge Dart’s 2013 Lineup in August Adds to Rising Confidence of Auto Shoppers

September 26, 2012, 12:00 am

≫ Next: Expert Advice On Trash Removal and Recycling From Industry Leader Mauriello Disposal

≪ Previous: Marshall Electronics VS-5310 IP Camera and Pinhole Lenses Provide Versatile, Unique Solutions for Business and Manufacturing Surveillance

$

0

0

 

The Dodge Dart Part of the Detroit 2013 Dodge Lineup

 

Will Smith Mgr of the 2013 Detroit Dodge Lineup

 

(EMAILWIRE.COM, September 26, 2012 ) Detroit, MI - Selling 3,045 units in August, the new Dodge Dart, main street’s classic, re-invented for the high-mileage coupe. The merger between Chrysler and Fiat continues to be working based on the number three automaker’s overall impressive comeback.

In the Chrysler 2011-sales cycle, a total of 148,472 units were sold, up a solid 14 percent from August 2011. For Chrysler, a company at the brink of demolition, this was excellent news. Maybe, it was the injection of Sergio Marchionne’s Italian management and the U.S. marketing flair.

The 2013 Dodge Dart is the first vehicle jointly designed with Fiat, its Italian owner. It is based on the Alfa Romeo Giulietta, Fiat’s European compact. However, it is wider and longer to appease American owners’ need for more space. The 2013 Dodge Dart is arguably the most anticipated vehicle of the year, according to analysts. Even before the Dart’s introduction at the 2012 Detroit Auto Show, the Dart had visceral electricity surrounding it.

The rise in auto sales is a sign of confidence for buyers and lenders. Cars are big-ticket purchases—$25,000, $30,000, $40,000. The majority of sales must be financed with either car loans or leases. Without the twin engines of available credit and shoppers’ willingness to assume financial obligations, two components that disappeared four years ago, there would be no recovery in auto sales.

Consumers who withdrew from the auto market are today looking for a 2013 auto with the help of lenders who have relaxed credit requirements.

On April 20, Chrysler announced that the Detroit Dodge Dart Lineup, the SE, SXT, Rallye, Limited and R/T models would range from about $16,000 to more than $22,500. Dodge defines its Dart as the epitome of customization. Shoppers have choices of 14 interior colors, 12 exterior colors, six wheel design options, three engine sizes and three transmissions.

Will Smith, new-car sales consultant for Dick Scott Motor Group’s dealership in Plymouth, has taken charge of the Detroit 2013 Dodge Dart Lineup. Contact Will for an appointment Monday through Saturday.

Office: (734) 451-2110
Cell: (313) 717-5526
E-mail WillSmith@DickScott.com
Blog: carsense101.blogspot.com

This press release was submitted by Dennis Nazelli at Grow Small Biz.





Will Smith
(734) 451-2110
carsense101@gmail.com

Source: EmailWire.Com

Expert Advice On Trash Removal and Recycling From Industry Leader Mauriello Disposal

September 29, 2012, 12:00 am

≫ Next: Hisco names four new vice-presidents

≪ Previous: Detroit’s Dodge Dart’s 2013 Lineup in August Adds to Rising Confidence of Auto Shoppers

$

0

0

(EMAILWIRE.COM, September 29, 2012 ) Verona, NJ --In a society increasingly concerned with the proper discarding procedures of trash and rubbish, many homeowners are concerned with the proper methods of large trash disposal. To rent a dumpster in Northern NJ, dumpster rental companies provide a solution to the do-it-yourselfer, but few understand exactly how to to take advantage of this service.

According to Mark Mauriello, the owner of Mauriello Disposal Inc., a leading provider of dumpster rental services in Northern New Jersey, it's actually a simple process to rent a dumpster for various projects. "Whether you're trying to get rid of building supplies, interior trash from a renovation, or just trying to de-clutter your house or garage, we can help. We have open-top Roll-off dumpsters from 10-40 cubic yards for all of your disposal needs, including clean outs or junk removal. We also carry compactors for industrial or commercial disposal applications." Mauriello advises homeowners or businesses to make sure reliable equipment is being rented or used and that you are getting exactly what you need. Says Mauriello, "We never over-sell the consumer. In fact we often recommend trying to donate any reusable items before discarding them. You also want to make sure that late-model equipment, operated by experienced and well-trained personnel, is being used. And use a company that is knowledgeable and capable of fabricating containers to suit your needs. Also, make sure that the company that you rent a dumpster from in Northern NJ is NJDEP licensed, insured, and a member of the Better Business Bureau."

Mauriello Disposal is also fully committed to the environment, and they recognize the need to recycle. According to Mauriello, a quality dumpster rental company should be able to provide recycling services and dumpsters for products like concrete, metal, wood, cardboard and paper. "An experienced sales team can often save customers money through an innovative approach to waste management, waste reduction and recycling. Thru recycling efforts, you can minimize the amount of trash that is generated, resulting in an economic benefit, as well as an environmental benefit."

Security is another very real problem facing businesses and consumers today. "That's why finding a company that will take care of document and data destruction is very important, too." Mauriello adds. "We also handle the destruction of special waste, such as food and international waste. These items are classified as "special waste" and have strict disposal requirements. We are entrusted by both the FDA and USDA to handle these types of waste."

"A good sign that you have a quality dumpster rentals NJ company," says Mauriello, "Is found in the customer base. A quality company will have federal and state agencies, Fortune 500 companies, land developers, contractors, small businesses and homeowners. The key is that all customer should enjoy the same level of attention and service; regardless of the job size."

About Mauriello Disposal, Inc.:

Mauriello Disposal is a family owned & operated disposal company. They have reliably served commercial, industrial, and residential customers in Bergen, Essex, Hudson, Middlesex, Morris, Passaic, Somerset, & Union Counties since 1912.


Mark Mauriello
973-239-6960
mjmauro@aol.com

Source: EmailWire.Com

Hisco names four new vice-presidents

September 28, 2012, 12:00 am

≫ Next: Wilmax Expands 100% Aluminium Off-Road Trailer Line as Demand for Increased Payload Capacity and Fuel Efficiency Continues to Grow

≪ Previous: Expert Advice On Trash Removal and Recycling From Industry Leader Mauriello Disposal

$

0

0

(EMAILWIRE.COM, September 28, 2012 ) Houston, TX -- Hisco, an employee-owned, specialty distribution company serving the electronic assembly, renewable energy, medical device and other industrial markets, announces the appointment of four new vice-presidents: Cindy Saigling, branch manager, Dallas; Richard French, branch manager, San Diego; Monte Schlaht, branch manager, Tempe; and Priscilla Everett, Human Resources Manager, Hisco Corporate.

Cindy Saigling started working for Hisco during college and joined full-time in 1980. Since then she has “had a taste of a little bit of everything” including inside sales, operations manager, outside sales and the last six years as branch manager. Her take on why the Dallas branch is so successful: “We really concentrate on our top lines instead of trying to be everything to everybody.” Hers was one of the first Hisco branches to put in an onsite vending system for customer inventory management; they now have many inventory management programs under way. “It makes a huge difference for customers and helps them reduce their vendor base. Within six months, they really realize the value,” she said.

Richard French joined Hisco as a customer service rep for the Little Rock, AK, branch in 1987. A few years later he headed west to Anaheim, working in outside sales. In 1994, Richard was part of the team that opened the San Diego branch; he has been branch manager since 2008. “Hisco’s entry into Mexico in the late 90’s had an enormous impact. The ability to service our customers from both sides of the border gave us an instant competitive advantage,” said French. He has seen a lot of changes over the years: “When I started, we were going from hand-written cards to computers. Now our people have multiple screens. Our customers are demanding information in minutes, not hours, days or weeks. And today, our customers ― and the products we supply them ― come from all over the world. As a result, logistics are more complicated and the solid distribution that Hisco provides has become an extremely important part of our customers’ supply chain.”

Monte Schlaht’s 20-year career with Hisco has taken him from warehousing, customer service, outside sales and then branch manager in Tempe for the last five. “I still have the drive and desire to do sales and handle some of the big accounts,” he says and he has a long history of going the extra mile for his customers. The Tempe branch handles a lot of the electronics distribution products Hisco is known for, and they also do extensive business in value-added converted products. They have significant expertise in aerospace and a focus on vendor-managed inventory accounts using vending.

Priscilla Everett has been promoted to Vice-President of Human Resources. In her new role, Priscilla will be responsible for helping Hisco attain the next level of competitive advantage through the expansion and improvement of human capital processes. She will assist the management team in job alignment, performance management, and maximizing employee capabilities and career potential. With over 35 years of HR experience ― the last 12 with Hisco as Human Resources Manager ― Priscilla recently received her Master’s Degree in Education, Administration & Supervision; graduating with honors, Sigma Alpha Phi, from the University of Houston. She is an active founding member of the local HR Vistage Executive Leadership Group; a long-term member of the National Society of Human Resources Management (SHRM) and a lifetime certified Senior Professional of Human Resources (SPHR) through SHRM; as well as an active participant in the National Society of Leadership & Success.

“At Hisco, vice-presidents are determined based on industry experience, a proven record of success, and leadership that serves the greater good of all Hisco employees,” said Bob Dill, president of Hisco. “Cindy, Richard, Monte and Priscilla demonstrate all these qualities and their nominations were unanimously supported by our Board of Directors.”

For more information about Hisco, visit www.hisco.com or call 888-602-4184.


About Hisco
For more than 40 years, Hisco has delivered value to customers through quality products, process solutions and local inventory. Today, the international branch network includes 34 stocking locations ― 23 in the United States (including Puerto Rico), 10 operated by the HiscoMex subsidiary in Mexico and one operated by HiscoCan in Canada. Four converting facilities provide value-added fabrication and custom repackaging. Hisco also offers vendor-managed inventory programs and specialized warehousing for chemical management, cold storage and logistic services.



Barbara Andrew
713-934-1657
bandrew@hiscoinc.com

Source: EmailWire.Com

Wilmax Expands 100% Aluminium Off-Road Trailer Line as Demand for Increased Payload Capacity and Fuel Efficiency Continues to Grow

September 28, 2012, 12:00 am

≫ Next: TimberTown Austin Launches Redesigned TimberTownAustin.com Website

≪ Previous: Hisco names four new vice-presidents

$

0

0

 

Wilmax Aluminium Fabrications

(EMAILWIRE.COM, September 28, 2012 ) Lonsdale, Australia -- Wilmax Aluminium Fabrications has recently announced the expansion of its aluminium product line and is now producing: custom built trailers, boats, boat trailers, trays and canopies, ute back campers, food vending vans and caravans. Wilmax specializes in aluminium fabrications of great durability, resistance and cost-effectiveness.

Wilmax has many years of experience manufacturing and selling 100% aluminium off-road trailers and slide on campers. The company has recently outlined the many benefits of purchasing campers made from this durable alloy compared to, for example, galvanized camping trailers. Among the benefits mentioned by representatives of Wilmax, customers will greatly benefit from enhanced durability, lightweight vehicles, increased payload capacity, corrosion and rust prevention, increased value and lifespan.

In a word, acquiring off road camper trailers made from aluminium is a beneficial long-term investment for customers aware of aluminium’s great benefits. “The recent expansion comes in response to customer demand for camper and boat trailers with low maintenance requirements, lightweight and affordable. All the new products recently introduced will be in compliance with the high quality standards that have established Wilmax as an authority in the camper trailer sales industry”, said representative of Wilmax talking about some of their newly-introduced products.
From the same category of campers that are light, yet durable, water and dust proof, yet spacious and neat looking, Wilmax offers several models of slide on camper trailers designed for comfort and easy to set up. At a moment’s notice, this camper is ready to use, eliminating the stress and hassle usually involved with setting camp.

“I had no hesitation when I decided to buy an aluminium camper trailer from Wilmax. In fact, I even convinced one of my neighbors to order one, and now he is excited for it to finally come in. The camper I purchased is simple, durable and well-built, and I’m sure it will last for as long as I need it to last. The fact that it’s made from aluminium guarantees there’ll be no rust, no rot or warp, ever. I was looking for something with low maintenance requirements and I found the perfect one” – Matt Wesley, Australia.

Aluminium camper trailers is also the option of horse and livestock owners, who prefer this type of transportation means for its many benefits, the same as those enumerated by representatives of Wilmax: these campers are lightweight, durable, resistant in time to rust and elements, high performance, great appearance and cost-effectiveness.

To check out the camper trailer Adelaide sales services provided by Wilmax, please visit their homepage at http://www.wilmax.com.au/Home/Home.asp and access the products section.

About Wilmax Aluminium Fabrications
In addition to custom built trailers, Wilmax Aluminium Fabrications also specialise in boat building, boat trailers, and trays and ute canopies. They can take care of just about all of clients’ trailer fabrication needs. As the best in the business in taking the needs of customers and building them into reality, Wilmax offers campers and trailers that are sure to make every outdoor experience into the most enjoyable one possible.

Contact Information:
Wilmax Aluminium Fabrications
1/12 Liston Road
Lonsdale SA
Phone 08 8322 6149
Email wilmax@internode.on.net



Erin Mccarthy
08 8322 6149
wilmax@internode.on.net

Source: EmailWire.Com

TimberTown Austin Launches Redesigned TimberTownAustin.com Website

September 29, 2012, 12:00 am

≫ Next: Electronic Cigarette Company Apollo E-Cigarettes to Save 1 Million Lives

≪ Previous: Wilmax Expands 100% Aluminium Off-Road Trailer Line as Demand for Increased Payload Capacity and Fuel Efficiency Continues to Grow

$

0

0

 

(EMAILWIRE.COM, September 29, 2012 )
Austin, TX -- TimberTown Austin has just unveiled their fully redesigned TimberTownAustin.com website to better showcase their products, provide greater user-friendly navigation as well as detailed product and project information. The lumber Austin specialists are Texas’ #1 source for outdoor living lumber and building materials.

For homeowners, builders and general contractors, creating the ideal outdoor environment for the home requires a combination of quality materials and support that can feed boundless design concepts within budget. In order to better showcase these attributes, TimberTown Austin has just unveiled their newly redesigned TimberTownAustin.com website.

“Homeowners, builders and contractors visiting our website have similar goals in mind, but see things from different perspectives,” said TimberTown Austin Owner Steve Anthony. ”Our redesigned website showcases both the aesthetic beauty, design possibilities and practical applications of our products so that each of these groups can make value decisions that do not constrain design, durability, use or efficient construction possibilities.”

While TimberTown has provided outdoor living lumber and building materials to the greater Austin, Texas and surrounding areas for many years, their 2012 partnership with Overseas Hardwoods Company (OHC) has greatly expanded the scope and variety of natural woods that TimberTown Austin can provide. As Austin hardwoods specialists, TimberTown stocks over one million board feet of Ipe, Tigerwood and Garapa.

The beauty, versatility, density, strength and hardness of these woods are showcased in all of their beauty, functionality and phenotype definitions on the redesigned website. Buyers will see the high-class appearance and fine texture in the golden-brown hues to deep reddish-brown colors of Tigerwood. The Austin Ipe decking provider’s redesigned website accurately shows the hardwood’s deep walnut brown, olive and mahogany-red color range as well as the uniform yellow-to-white-colored beauty of Garapa wood.

To insure quality at every level, their management team has developed personal relationships with their suppliers and travels to Brazil several times each year to buy from mills that follow responsible and legal harvesting practices. “We dictate how our suppliers package and ship, as well as inspect each container before and after arrival,” said Anthony.

Their softwoods selection includes the finest cedar, redwood and treated pine available for outdoor projects. In addition to their Architectural Douglas Fir, a variety of composites combine beauty, durability and low maintenance with a wide range of colors, grades and finishes.

Buyers will find a wide variety of deck rails and railing systems, the comprehensive Trex Elevation Deck Framing System, and an extensive line of hardware and fasteners for code-compliant installation. The website’s blog also provides articles that give the anatomy of woods as they pertain to use as building materials.

TimberTown Austin manufactures custom, high-performance products in their own manufacturing facility and showcases their products in their new 33,000 square-foot warehouse. http://timbertownaustin.com

About TimberTown Austin:

TimberTown Austin is Central Texas’ # 1 source for the widest selection of quality outdoor living lumber and building materials at competitive prices. The partnership between TimberTown and OHC’s hardwood history brings homeowners, contractors and buyers the finest selection of hardwoods and softwoods including Cedar, Redwood, Treated Pine, Fir, Ipe, Tigerwood and Garapa. Exemplary, friendly customer service with excellent delivery programs and a fair return policy are the foundations of TimberTown Austin.

###


Steve Anthony
512-528-8112
sales@timbertownusa.com

Source: EmailWire.Com

---

Electronic Cigarette Company Apollo E-Cigarettes to Save 1 Million Lives

October 2, 2012, 12:00 am

≫ Next: Celtic tribe fleeing Caesar army left behind thousands of coins reports CustomCoinStore.com

≪ Previous: TimberTown Austin Launches Redesigned TimberTownAustin.com Website

$

0

0

 

(EMAILWIRE.COM, October 02, 2012 )
Los Angeles, CA -- Based on the cornerstone of their mission to help cigarette smokers start a whole new life by trying e-cigarettes, Apollo Electronic Cigarettes is giving away one million electronic cigarettes. As one of the first American companies to make and sell its own line of E-cigs, Apollo offers a full line of starter kits, disposable e-cigarettes, e-cigars, more than fifteen exciting e-liquid flavors and much more.

With the number of tobacco smokers declining, Apollo Electronic Cigarettes is working to hasten tobacco’s demise by giving away one million e-cigs as part of its large “healthier alternative” promotion. Each electronic cigarette provides enough refreshing vapes to equal more than two packs of regular cigarettes without the smoke and carcinogens. “As one of the first e-cigarette makers, we have always been innovators with a mission to be a force for good,” said an Apollo Electronic Cigarettes spokesperson. “Despite the cost to us of nearly 10 million dollars ($9.95 per E-cigarette), this promotion represents our commitment to growing the community of former cigarette smokers and helping people lead healthier lives.”

To claim their disposable free electronic cigarette that is delivered charged and ready to go, people merely “Share” the page from the company’s website that details the offer to a social media site like Facebook, Twitter or Pinterest. Promotion participants can select from four nicotine levels ranging from low to high and choose from among tobacco, menthol, coffee, cherry or vanilla flavors. Unlike tobacco, E-cigs do not produce any tar, flames, bad smell, or smoke while still providing a satisfying flavor and smoking sensation that can be enjoyed anywhere at any time.

Founded by experts from the tobacco and electronic industries, Apollo boasts its own high-tech R&D and manufacturing facilities to produce all of their e-cigs and e-juice to exacting standards. With their own line of disposable e-cigarettes as well as starter kits, e-cigars, accessories and more than fifteen exciting e-liquid flavors, Apollo is known for the highest quality and lowest prices on the market.

In addition to a year warranty, free shipping and satisfaction guarantee on all products, Apollo offers a fantastic community of worldwide users backed by award-winning support. “We are there to help former smokers every step of the way because our aim is to convert people from traditional tobacco to e-cigarettes so that they can begin leading the healthier life they envision,” said the spokesperson.

While Apollo’s main goal is to provide their customers with products and services that deliver the best possible vaping experience, the company is built on integrity and a belief in doing the right thing regardless of the consequences. Their huge one million e-cig giveaway is meant to be a testament to those values and that goal. After sharing the offer with others on Facebook, Twitter or Pinterest, promotion participants only pay one or two dollars for shipping and age verification to receive their free e-cig. For more information, please visit http://www.apolloecigs.com/Free-Electronic-Cigarette-s/80.htm

About Apollo Electronic Cigarettes:

Apollo Electronic Cigarettes is one of the first American companies to sell and create its own brand of electronic cigarette. The company has its own manufacturing facilities to produce their e-cigarettes and e-juice to the highest standards. In addition to a full line of starter kits, disposable e-cigarettes, e-cigars and fifteen exciting e-liquid flavors, Apollo offers a year warranty, free shipping, satisfaction guarantee and award winning support.

###


Jack Almeida
(949) 555-2861
admin@rocketfactor.com

Source: EmailWire.Com

Celtic tribe fleeing Caesar army left behind thousands of coins reports CustomCoinStore.com

October 3, 2012, 12:00 am

≫ Next: Lawrie Technology, Inc. (LTI) to be featured on 21st Century Business Television 2012

≪ Previous: Electronic Cigarette Company Apollo E-Cigarettes to Save 1 Million Lives

$

0

0

(EMAILWIRE.COM, October 03, 2012 ) San Francisco, CA- Jersey Heritage is busy sorting and cleaning what appears to be the largest discovery of its kind - 70,000 ancient coins recently found on the island.

Two amateur metal detector enthusiasts, Reg Mead and Richard Miles, discovered the coins after a woman told them her father had found some coins in a field several years prior.

Experts believe tribesmen from Gaul hid the coins in the island in 50 BC to keep them from Caesar and his army.Neil Mahrer of Jersey Heritage said that within the large hunk of recovered coins is jewelry and organic material that could be the remains of bags in which coins were placed before they were thrown into the pit.

Mr. Mahrer said: "We assumed it would be a coin hoard but when I started to clear back the surface I found a piece of silver Celtic jewellery. We have no idea how much jewellery or other material is hidden inside.

"Virtually no two are exactly the same, they are all of a known type so far from one tribe on the French coast but we can only see about 1 percent of the coins in it."
Mr. Mahrer, a conservation specialist, spent several months removing layers of earth to uncover coins hidden below.
However, that was the first phase, he said. The real work involves separating and cleaning the coins and jewelry.

Mr. Mahrer is doing that work with the mud-covered coins in the center of the floor in a small lab. "Doing it virtually coin by coin we are expecting it to take six to eight years for one person. We hope to employ two other people than myself and do it in a two to three year period.

"Painstaking is the word, because we are doing it as correctly as we can it is going to take time. Trying to get as much information as we can from the hoard means recording the positions of all the coins, recording all their treatment, treating them very carefully and slowly," he said.

Jersey Heritage hopes to display cleaned coins and jewelry at the Jersey Museum.
Although the coins have a financial value, it is impossible to quantify it until all coins are accounted for and cleaned, said Mr. Mahrer.

The true value, he added, is the historic and scientific significance of the discovery.
Meanwhile, no two coins from the hoard are the same, he said. "The importance of this is what we hope to find out about Jersey and France at this time. As simple scrap metal it is bound to have some value and as coins on the market it has some value but doing it coin by coin we hope to find out what was put into the hoard at a bag by bag level."

The coins came from the Coriosolite tribe, a French Celtic nation that ruled over the area near St Malo and Dinan, said Mr. Mahrer. They date “from about 50 or 60 BC which is around the time Julius Caesar invaded Gaul and the two facts are presumably connected. This money was rushed to here, it is very tempting to talk about offshore banking but it was certainly removed from the French mainland to here.
"I'm not sure why, whether to be hidden, reused or somewhere the coins for the tribes were made. It was Celtic tribes fighting the Romans, it was Asterix basically."

About CustomCoinStore.com:

CustomCoinStore.com (http://www.customcoinstore.com) creates custom Challenge coins. The coins have been used by military and private organizations around the world, and date back in time for generations. The Custom Coin Store will begin creating your unique coin soon after you fill out a design form.


Donald James Bakers
4158901547
contact@CustomCoinStore.com

Source: EmailWire.Com

Lawrie Technology, Inc. (LTI) to be featured on 21st Century Business Television 2012

October 9, 2012, 12:00 am

≫ Next: High Efficiency Furnaces Can Save Homeowners Thousands Of Dollars In Utility Costs says Bucks Furnace and Air

≪ Previous: Celtic tribe fleeing Caesar army left behind thousands of coins reports CustomCoinStore.com

$

0

0

 

(EMAILWIRE.COM, October 09, 2012 ) Boca Raton, FL --- Carbon fiber - the superman of material demonstrating stiff, strong, durable, yet lightweight properties - is used in many processes to create excellent building materials. Carbon fiber material comes in a variety of "raw" building-blocks which are, in turn, used to create composite parts. Particularly in structural design, where added weight may translate into increased lifecycle costs or unsatisfactory performance, carbon fiber components should be considered.

Lawrie Technology, Inc. (LTI) specializes in the optimization of both the structural design and manufacturing process for parts made from advanced composite materials. While traditional structures previously used for these capabilities are typically metal, they are heavy, tend to corrode and have a shorter life span than composite material.

With over 20 years of development in advanced composite products, LTI carries a matchless level of expertise across all aspects of design, stress analyses, and manufacturing. More so than with any other class of materials LTI considers a concurrent engineering approach essential to successful product development. LTI has learned on numerous projects how to get it right the first time by linking design for performance with process design and has undertaken this for clients in all industries. With support from a current NASA contract, LTI is currently launching a new product line of flexible carbon fiber drive shafts connecting driving and driven machines from 50 hp through 3,000 hp and 75% lighter than incumbent solutions.

To learn more about Lawrie Technology, Inc., please visit http://lawrietechnology.com.


About 21st Century Business
21st Century Business is an award winning television series produced by Multi-Media Productions. The show features companies providing business viewers an in depth opportunity to find solutions within many industries globally.

21st Century Business airs on CNBC and the Fox Business Network to over 100 million viewers nationwide as well as internationally via DirecTV and Dish Network. The show can also be viewed through video on demand via http://www.21cbtv.com. The series is also available at more than 27 prestigious college universities, including Carnegie Mellon University, Howard University, Dartmouth College and Georgetown University.

For specific market-by-market air dates and times, please e-mail Moniqueh@mmpusa.com. For more information, please visit http://www.21cbtv.com



Susan Waters
919 732 3070
swaters@mmpusa.com

Source: EmailWire.Com

High Efficiency Furnaces Can Save Homeowners Thousands Of Dollars In Utility Costs says Bucks Furnace and Air

October 8, 2012, 12:00 am

≫ Next: Polyaspartic Coatings by HP Spartacote® Offer New Benefits to Concrete Floor Coating Projects

≪ Previous: Lawrie Technology, Inc. (LTI) to be featured on 21st Century Business Television 2012

$

0

0

(EMAILWIRE.COM, October 08, 2012 ) Palatine, IL -- In this day and age of under performing savings account interest rates and stock market uncertainty, some Illinois families have found an unlikely investment with a guaranteed rate of return. They have not found this investment at a bank or stockbroker, but rather with their local HVAC contractor.



It pretty much goes without saying it but Illinois winters can be very cold so in places like Arlington Heights heating a home can be a very expensive task. In nearby Schaumburg heating an average size house can cost thousands of dollars per year. So it is no surprise that cash strapped families are looking for ways to save money and looking for a safe place to invest their hard earned money.



When it came time to replace the Davis family of Buffalo Grove heating system, the family learned that a $2400 furnace that is 92% efficient would reduce their gas bill by $600 per year or 25% return on investment. Since the Davis family has no plans on moving, the new furnace will save them over $12000 during its expected 20 year lifespan. Since the Davis’ old furnace was old and needed repairs almost every year, and the fact that the average heating and cooling repair costs over $300, the fact that the new furnace came with a 10 year parts and labor warranty was a nice bonus! They wont have to pay a cent to repair the furnace since the warranty covers everything except for cleanings or maintenance visits.



Bucks Furnace & Air of Palatine Illinois, an American Standard Dealer, recommends that before replacing a furnace, a qualified contractor should perform an operating cost analyses on a computer using actual utility rates and local area weather conditions. Ben Martorano of Bucks Furnace & Air has said in his 20 year HVAC career he has personally seen customers save as much as $1200 annually just by installing a new furnace.



About Bucks Furnace & Air



Bucks Furnace & Air of Palatine Illinois is an American Standard Dealer and has been serving customers in the Chicago area since 1997.


Ben Martorano
(888)-982-8257
support@massmediaseo.com

Source: EmailWire.Com

Polyaspartic Coatings by HP Spartacote® Offer New Benefits to Concrete Floor Coating Projects

October 9, 2012, 12:00 am

≫ Next: Cattle Guard Forms to Be Featured at the Sunbelt Ag Expo

≪ Previous: High Efficiency Furnaces Can Save Homeowners Thousands Of Dollars In Utility Costs says Bucks Furnace and Air

$

0

0

 

(EMAILWIRE.COM, October 09, 2012 )
Golden, CO -- Polyaspartic polyurea, a new concrete floor coating and sealer, is gaining popularity in the contracting world due to its wonderful qualities. The floor coating, which can be applied at almost every temperature, bonds well with concrete surfaces quickly and is flexible, durable, and resistant to UV qualities.

For years, concrete floor coating systems company HP Spartacote® has been supplying contractors, governments, and developers across the world with polyaspartic covers. HP Spartacote®’s protective coatings have been used in bridge and highway, rail, industrial flooring, ground and waterworks, architectural steel, and yacht projects, just to name a few. The company has been creating quite a buzz lately for their high-performance polyaspartic coatings, which is a part of their goal to stay abreast of current marketplace trends.

The protective coatings supplied by HP Spartacote® have been proven to be adhesive and corrosion and chemical resistant. The company is well known for their use of moisture cure coating techniques to create products that can withstand any climate, including “temperatures well below that of standard epoxies and urethanes,” and that can dry at any temperature.

Polyaspartic top coats are also green friendly due to their strength and durability. The coatings can be replaced less often than their competitors’, while simultaneously increasing the life span of the structure it is applied to. Polyaspartic topcoats are also very safe, and provide support to areas where traction is key. The adhesion applied to the surfaces, especially concrete and steel, by the product has often been referred to as superior.

Clients that choose to have contractors install HP Spartacote® polyaspartic covers enjoy saving time and money. HP Spartacote®’s polyaspartic coats return to full on service in just one day due to the coating’s quick drying ability, plus the company completes projects for reasonable rates.

All of HP Spartacote®’s floor coating products are available for viewing on their website. The company welcomes any questions that clients may have about their products, and encourages all clients to contact them using the available form.

About HP Spartacote:

Located in Golden Colorado, HP Spartacote® is a manufacturer of high performance polyaspartic concrete floor coating systems. The company services commercial and industrial coatings contractors, governments, and developers throughout the world. HP Spartacote® works closely with facility managers and architects to specify highly durable and sustainable coating solutions for a range of applications, offering expert consultation from design through completion. For more information, please visit http://www.hpspartacote.com

###


HP Spartacote
866-966-1329
contact@hpspartacote.com

Source: EmailWire.Com

Cattle Guard Forms to Be Featured at the Sunbelt Ag Expo

October 12, 2012, 12:00 am

≫ Next: Churchfield Sofa Beds Offers a Wide Range of High-Quality British Handmade Furniture

≪ Previous: Polyaspartic Coatings by HP Spartacote® Offer New Benefits to Concrete Floor Coating Projects

$

0

0

(EMAILWIRE.COM, October 12, 2012 ) Moultrie, GA -- The latest in cattle guards will be showcased by Cattle Guard Forms at the upcoming Sunbelt Ag Expo. Organizers will feature these patented forms front and center in the livestock pavilion, booth 61, from October 16-18th. According to creator James Hoenstine, Cattle Guard Forms will officially unveil the first heavy duty cattle guard that any farmer or property owner can afford,"

"Cattle guards have become a valuable asset for managing a farmer's livestock and time. Often though, due to high cattle guard prices, farmers feel they have no choice, but to go with traditional cattle gates," Mr. Hoenstine explains. "Finding dependable, economical, strong cattle guards isn't easy. In fact, I found it almost impossible which is why I dedicated myself and a number of structural engineers to design engineer a cattle guard that's heavy duty and affordable. A cattle guard form is the result and we've designed it to accommodate various sized gate openings."

Each cattle guard form is constructed using pre-installed, light-weight 5/8" GFRP rebar and yet an 8'X6' form weighs only 140 pounds so it's easier and less expensive to transport. Retailers and farm supply stores now have a cattle guard that consumers can easily pick up and take home without a forklift or tractor. The traditional steel cattle guard of the same size can weigh as much as 1,200 pounds (not including the concrete footing). "When purchasing cattle guards, livestock and cattle farmers will save up to 50% over traditional steel cattle guards. To use the form, simply set it in the desired location, then pour concrete over it either using a mixer or concrete truck. Then just let it cure. There is no need to remove or flip the form."

Concrete is superior to steel in many ways. It is stronger, costs less and lasts longer. In fact, traditional concrete cattle guards weigh almost twice as much as their steel counterparts. Cattle Guard Forms solve this problem and combines the strength and affordability of concrete with the ease and mobility of a light-weight form, says James Hoenstine.

Each Cattle Guard Form is design engineered to achieve a certified HS-20 load rating which translates into 32,000 pounds per axle. The form itself only weighs 140 pounds. "This is one reason why we are able to offer substantial savings to our customers. The reduced weight of the form saves us money which we can pass on. Shipping anywhere in the United States is only $99, " Mr. Hoenstine goes on to say.

"Livestock farmers spend too much time opening and closing gates, but at the same time don't want to spend a great deal of money on overpriced cattle guards. Now they don't have to. To save our customers even more, we are offering a special discount ticket to anyone who meets us at the Sunbelt Ag Expo. So, if you are attending, be sure to stop by and visit for a few minutes," Mr. Hoenstine states. "We'll have a ticket waiting for everyone who does."

About Cattle Guard Forms:
Cattle Guard Forms is dedicated to producing heavy duty, dependable cattle guards at an affordable price. The company mission is to provide customers with a professionally crafted cattle guard that offers value without cutting corners. The cattle guard form will deliver a dependable and long lasting cattle guard that's easy on the wallet. It's the creation of a farmer who was simply unable to find an economical, strong, dependable cattle guard design for use with his personal livestock.



James Hoenstine
1 -888-649-9996
support@cattleguardforms.com

Source: EmailWire.Com

Churchfield Sofa Beds Offers a Wide Range of High-Quality British Handmade Furniture

October 13, 2012, 12:00 am

≫ Next: Yamaha India hires 200 women for scooter assembly line reports Assembly-Jobs.com

≪ Previous: Cattle Guard Forms to Be Featured at the Sunbelt Ag Expo

$

0

0

 

(EMAILWIRE.COM, October 13, 2012 )
Cheshire, UK -- As most interior decorators agree, one of the best ways to update the look of a room is with a few select pieces of beautiful furniture. From classically-designed sofa beds and attractive children’s pieces to accessories like ottomans and more, the type of furniture a person selects can really have a positive impact on the overall feel of a home.

A UK-based company has been getting a lot of attention lately for its wide range of gorgeous, high-quality and durable furniture. Churchfield Sofa Bed Company, home of British handmade contemporary furniture, has developed a well-deserved reputation over the years for its wide range of chairs, sofas and sofa bed designs.

Because everything the company makes is designed, developed and handmade in the UK—which is quite rare in this day and age—the name Churchfield Sofa Bed Company is now synonymous with British handmade furniture. All of the products are made by experienced craftsmen at one of the company’s three factories, which are located in the lovely Cheshire countryside.

In addition, all of the furniture that is made and sold at Churchfield Sofa Bed Company is extremely practical. Whether customers are looking for a classic or modern look, they are sure to find exactly what they are looking for.

As Ian Swinburn, Managing Director for Churchfield Sofa Bed Company, noted in an article on the company’s website, every item of furniture that the company sells is constructed with a solid wooden frame, and features generous amounts of foam and fibre padding. The pieces are then upholstered in a variety of attractive and incredibly high quality fabrics, all of which comply with the very strict British Standard for fire retardency regulations.

“As we are genuinely a UK design and manufacturing company we also supply a complete range of furniture that is suitable for contract applications such as schools, colleges, universities, hotels, hospitals, retirement homes and many more,” Swinburn noted.

Customers who are interested in learning more about the Churchfield Sofa Bed Company may visit its user-friendly website at any time; there, people may browse through the vast selection of furniture that is available. Handy category tabs at the top of the page will help shoppers find what type of furniture they are looking for quickly and easily, and every item is accompanied by a full colour photo, in-depth description, available fabric and colour choices, and pricing and shipping information.

About Churchfield Sofa Bed Company:

Churchfield Sofa Bed Company are a UK based furniture designer and manufacturer, with a great reputation for quality at affordable prices. Every sofa bed on the company’s website is available in a huge range of colours, patterns and fabrics, which will be handmade just for the customer. For more information, please visit http://www.sofabed.co.uk

###


Ian Swinburn
0800 064 5844
info@sofabed.co.uk

Source: EmailWire.Com

---

Yamaha India hires 200 women for scooter assembly line reports Assembly-Jobs.com

October 16, 2012, 12:00 am

≫ Next: Orbital Fasteners Introduces Next Day Delivery on All Products

≪ Previous: Churchfield Sofa Beds Offers a Wide Range of High-Quality British Handmade Furniture

$

0

0

(EMAILWIRE.COM, October 16, 2012 ) Yamaha India has started an all-women assembly line for scooters.
The company hired 200 women to work on the assembly line, located in Yamaha’s Surajpur plant in UP.

Through its initiative, Yamaha is offering classroom and on-the-job training for the women, who will undergo an apprenticeship program approved by state government. The three-year apprenticeship will offer industrial training, among other types of training.
Each of the 200 women will take an Industrial Training Institute examination at the end of each year.

Once they complete the program, the women will receive an ITI certification approved by the UP government.

Mr. Roy Kurian, National Business Head, India Yamaha Motor, said, “This is the first time in Yamaha’s history, not only in India but also worldwide, that the company has started an assembly line which is run exclusively by women. Being the pioneers in this movement, Yamaha certainly hopes to see this initiative being replicated across the industry.”

In related news, the company recently developed a riding training program for female customers throughout India. Known as the Yamaha Female Riding Training program, it targets young urban women, also the target of the company’s recently launched scooter Ray.

Yamaha has also focused on improving its customer care for female customers in part by hiring more women to work in customer service and introducing female customer care programs.

The much anticipated Yamaha Ray was first shown in Hyderabad in September. It is the first Yamaha scooter model for women in India.

The company opted to enter India’s scooter segment owing to large demand for the product from college students and young working women.

About Assembly-Jobs.com:

Assembly-Jobs.com (http://www.assembly-jobs.com/) offers a free starter guide for those interested in home assembly jobs. The business has researched companies that hire individuals to perform assembly work, crafts, sewing, jewelry making, envelope stuffing, and mailing circulars, and have come up with a large listing of these companies for the interested worker to work at home assembly jobs. Assembly jobs offer people the chance to assemble products at home and do assembly work at home. Assembly jobs at home can be found through the website.


Walter Fred Durante
4156710947
contact@Assembly-Jobs.com

Source: EmailWire.Com

Orbital Fasteners Introduces Next Day Delivery on All Products

October 25, 2012, 12:00 am

≫ Next: Raising Standards in Bioreagent Production: Biologics International Corp (BIC) Uses Unique Proprietary Technologies to Produce High Quality Bioreagents, Targeting a Growing Market

≪ Previous: Yamaha India hires 200 women for scooter assembly line reports Assembly-Jobs.com

$

0

0

 

Orbital Fasteners

(EMAILWIRE.COM, October 25, 2012 ) Watford, United Kingdom -- The majority of homeowners have had, at least once in their lives, some kind of plumbing, roofing or electrical wiring problem. If in the past most people would immediately resort to the services of professional tradesmen to get the job done quickly and inexpensively, these days things are quite the opposite. “Studies show that over a quarter of the people who have used the services of a tradesman were unhappy with the quality of work or price”, said Managing Director for Orbital Fasteners, a leading distributor of fixings, fasteners and power tools.

The rising costs of hiring a tradesman and the risks involved have forced many homeowners to consider carrying out home improvement tasks themselves. With more than 30 years of experience in product distribution and customer service, Orbital Fasteners is their one-stop destination where they can choose from more than 27,000 products from 300 manufacturers.

Orbital Fasteners is one of the largest steel and stainless steel fasteners on the market, offering anything from bolts, Simpson joist hangers and steel washers to socket screws and full nuts. Fixings available at Orbital Fasteners include through bolts, cable ties, steel shims, as well as heavy duty fixings such as rawlplugs, construction resins and anchor bolts. All fixings and fasteners, as well as professional tools such as power tools, cutters and drills are well suited for professionals who need the highest-quality tools and impeccable service. Included in their offer are also stainless steel self tapping screws, ideal for high torque installation.

“FANTASTIC. My order was delivered in less than 24 hours. Although my order was for only £25 it obviously received the same treatment as an order of £100s. Well done Orbital if only all companies had the same sense of urgency. Thank you.” - A. J. Faulkner.
The company offers next day delivery on all orders and a lot of discounts in the clearance section. Please visit http://www.orbitalfasteners.co.uk/ to access their current offer.

About Orbital Fasteners
Orbital Fasteners is a leading online & telesales distributor of fixings, fasteners, tools & power tools specialising in next day delivery to construction sites and factories in and around London via their own van fleet and nationally via carrier. The company has nearly 30 years experience in product, application know-how and customer service.

Contact Information:

Orbital Fasteners
Olds Approach Tolpits Lane
Watford WD18 9XT
United Kingdom
Phone Number: 01923 777777



David Wright
01923 777777
info@orbitalfasteners.co.uk

Source: EmailWire.Com

Raising Standards in Bioreagent Production: Biologics International Corp (BIC) Uses Unique Proprietary Technologies to Produce High Quality Bioreagents, Targeting a Growing Market

October 25, 2012, 12:00 am

≫ Next: Online Skiing Outlet Alpine Ski Shop Helps Beat Recession Blues

≪ Previous: Orbital Fasteners Introduces Next Day Delivery on All Products

$

0

0

(EMAILWIRE.COM, October 25, 2012 ) Indianapolis, IN -- From its base in Indianapolis, Biologics International Corp’s aim is to target a global market in recombinant cytokine production. Under current leadership, the company develops and sells BIC cytokines , enzyme and growth factor products, but it also offers pre-tested hormones, viral antigens, chemokines, neurotrophic and associated bioreagents to scientists and researchers from all around the world. The company’s target audience includes pharmaceutical companies and biotechnology industry, as well as research institutions.

“Since cytokines are involved in acute and chronic inflammation, allergies, asthma and immune mechanisms, our bio reagents are useful to scientists doing research in these areas”, said representative of Biologics International Corp. “Our products are sold to researchers from a number of countries in America and Europe, but we have plans to expand service area and cater to the needs of scientists from all over the world”.

What sets Biologics International Corp aside from other bio reagents providers is their unique experience in protein purification and expression enabled by their proprietary purification technologies. All scientists working at BIC are highly trained, having over 10 years of experience in stem cell biology, cancer research and other research fields. Furthermore, the company is interested in collaborating with scientists in order to gain a better understanding of their research and development needs.

“At Biologics International Corp, our goal is to provide scientists and researchers with the best available biological reagents and tools, ultimately being a partner you can trust and depend on to help achieve your goals quicker at a lower cost.”

BIC offers a wide range of products and services including recombinant antigens, growth factors, monoclonal and polyclonal antibodies, technology licensing, as well as cytokine assay services. With considerable potential to develop the market for their products, the company aims to brings its contribution for the benefit of the bioscience community. For more information on the company’s mission, please visit http://www.biologicscorp.com/.

About Biologics International Corp
Biologics International Corp is a leading manufacturer focusing on providing the highest quality cytokines, chemokines, growth factors, viral antigens, and other functional proteins for Research and Development.

Contact Information:

BIC, Biologics International Corp
5429 Bay Harbor Drive
INDIANAPOLIS, IN 46254-4509
United States
Phone Number: +1 317 430 2453


eric gu
+1 317 430 2453
arthurwang100@gmail.com

Source: EmailWire.Com

Online Skiing Outlet Alpine Ski Shop Helps Beat Recession Blues

October 27, 2012, 12:00 am

≫ Next: Shopping for Incontinence Products Easier and Faster: AdultMedSupply.com Expands Product Range and Revamps Online Presence

≪ Previous: Raising Standards in Bioreagent Production: Biologics International Corp (BIC) Uses Unique Proprietary Technologies to Produce High Quality Bioreagents, Targeting a Growing Market

$

0

0

(EMAILWIRE.COM, October 27, 2012 ) Spring,Texas -- Now that the winter is fast approaching, skiing enthusiasts are turning to the slopes and to the new ski equipment’s that they would love to have for the coming season. Now-a-days everyone needs to plan their budget cautiously; henceforth www.alpineskishop.net is rapidly becoming the next online destination for the enthusiastic skiers.

With a dazzling array of leading brands, there is absolutely no need to compromise on quality or choice. Everything the skier needs is right there; skis, poles, boots, goggles, alpine touring equipment, helmets, bindings, clothing, ski bags etc.

Brands on offer include Volki, Armada, Oakley, Fischer, Nordica, Atomic, Salomon and Lil Flake. They also have a great selection of gently used items which are ideal for a newbie or a person on a limited budget.

There's a vast variety in the world of ski, from basic skis to high tech international racing skis. Ski styles include advanced, all terrain, carving, freestyle, racing, rocker, shape and twin tip. Whatever your skiing urge is, alpineskishop.net has it all covered, at a price that will get the buyer impressed.

Families looking to launch their children in skiing should check Alpineskishop.net for buying ski gears. They can find almost everything to start skiing without spending a huge chunk of money. The site is attractive, easy to use, has plenty of detailed information about ski gears, and has a wide variety for the customers. The equipment’s have better durability, better style and above all they ensure the safety of the users.

Contact Information:

Alpine Ski Shop
1810 Katlyn Ln
Spring, TX 77386
United States

Phone : 7049003009



Nicole
7049003009
admin@alpineskishop.net

Source: EmailWire.Com

Shopping for Incontinence Products Easier and Faster: AdultMedSupply.com Expands Product Range and Revamps Online Presence

October 25, 2012, 12:00 am

≫ Next: North Carolina Gun Safe Company Launches New Website at www.GunSafeSecurity.com to Promote Gun Safety and Secure Storage

≪ Previous: Online Skiing Outlet Alpine Ski Shop Helps Beat Recession Blues

$

0

0

(EMAILWIRE.COM, October 25, 2012 ) Pennsauken, NJ -- Millions of Americans are currently suffering from incontinence problems, with most of them facing several other health challenges affecting the quality of their life. For the adult men and women of America to be able to regain their standards of living and have the possibility to address all these health issues in a safe and dignified manner, AdultMedSupply.com brings forth a wide selection of highest-quality adult medical equipment, incontinence supplies, bedroom and bathroom enhancements, including products and accessories for the elderly and the disabled.

The healthcare products recently added on AdultMedSupply.com are created using innovative technologies and top quality materials in order to offer superior protection and enhanced functionality. With a focused mission to serve all needs and requirements of customers facing different health challenges, AdultMedSupply.com provides products, equipment and accessories that allow people to stay comfortable, safe and independent. Their diverse product line includes bedroom and bathroom enhancements for the daily needs and care of seniors and the disabled, including anything from adult diapers, bathroom aids, walkers and wheelchairs to luxury and hard to find adult medical supplies .

The CEO of the company explained how customers will benefit from the recent improvements: “I'm thrilled to be announcing the release of our new on-line shopping experience. Now, the aged, people living with various disabilities, baby boomers caring for aging parents, anyone searching for products that will allow them to remain independent and maintain an active lifestyle, will find www.adultmedsupply.com the best and most economical way to buy.”

The revamped design of AdultMedSupply.com allows customers to browse the entire offer in a more convenient manner and find the items they need faster than before. The company offers products at low prices, fast shipping and excellent customer service, allowing both first-time and returning customers to enjoy priority attention, complete security and careful handling of their shipment. For more information, please visit http://www.adultmedsupply.com.

About AdultMedSupply.com
AdultMedSupply.com provides healthcare products and accessories to customers across the United States. As one of the leading suppliers of incontinence products, bathroom and bedroom enhancements, adult medical equipment and luxury items, AdultMedSupply.com is dedicated to help individuals, regardless of their health challenges, remain independent and maintain high standards of living.

Contact Information:

AdultMedSupply.com
Pennsauken, NJ 08109
Phone: 856 - 663- 5123



Charles G Boulais
856 - 663- 5123 
modworld50@gmail.com

Source: EmailWire.Com